Toyota CH-R 2017+ XPR Lightbar Lightbar Kit Vision-X

Full Vision-X Kit consisting of 1 Vision-X LED-Lightbar XPR-9 E-marked with Ref. No. 45 and a high quality mounting kit for your Toyota CH-R 2017+.

Technical Data XPR-9:
Beam Pattern: Straight (6.5°/70°):
Raw Lumens: 9.711 lm(ea):
Effective Lumens: 6.798 lm(ea):
Power: 90 Watt:
Weight: 2,31 kg:
Dimensions: 476x95x81 mm

Features
LEDs: 10W Per LED
Housing Material: Aluminium
Light Colour Temp: 6000 Kelvin
Voltage: 11-32V DC
Amperage: 1.25A~11.25A@24V DC - 2.5A~22.5A@12V DC
Vibration Rating: 21 Grms
Lens Material: Polycarbonate
Xtreme Five Watt LED is Driven to 90% Efficiency
Proprietary IRIS Reflector Technology
Dual Mounting Standard
Weatherproof Deutsch Connector
Certifications: CE, RoHS, IEC 62471, E-Mark
IRIS reflector technology

Vision X Lighting introduces the Xmitter Prime Iris Light Bar series or XPR. This new generation of LED Light bars features two features not seen on a Vision X light bar before, IRIS reflector technology, and dual mounting, both patented feet mount and end mount brackets are included standard. The XPR series is launching with 7 different lengths, ranging from 11.5” to 51”, and a single beam option.

The 10-watt LEDs in these light bars are paired with IRIS reflector technology to project usable light further than ever before possible. IRIS reflector technology was first introduced with the Optimus Series in 2012, using deeply recessed reflectors to achieve unmatched distance in a light of that size. The XPR light bars create an unmatched distance option in LED Light Bars. The 27 LED light bar produces 1,600ft of usable light. Another new innovation in these light bars is the use of tilting reflectors, allowing the outer 3 LEDs on each end of the light bars (sizes above 6 LED) to tilt out to create a mixed or combo beam pattern. Increasing the spread of the light, tilting reflectors creates even more visibility for the driver. The XPR series offers several mounting options, Vision X’s patented feet mounts, new end mount brackets, or pair the patented feet mounts with Vision X’s billet tube mounts (available as an accessory) to mount to roll cages or any tube framing. New end mounts securely fasten to the housing with two bolts and lock washers per end, and allow for vertical adjustment once mounted.

General information: In Germany your are only allowed to have a maximum of 4 individual high beams. The overall reference must not extend beyond 100. Lights are only allowed as a pair. All high beams must turn off when you switch off your regular high beams. Certified lights must only be used for what they are certified for (driving lights, fog lights, reversing lights etc.). Regulations might differ in other countries.

If you still have a question or you did find what you were looking for, do not hesitate to contact us. We offer a wide range of Vision-X and offroad/outdoor products.